Apps update is disabled!
  • Hybrid Transformer™:
    Specially design transformer to improve thermal and efficiency.
    Patent design transformer mount with heat sink, the size was reduced by up to 25% than the traditional transformer providing lesser energy consumption, while conducting the heat for better overall efficiency
     
  • HTT™ - Heat Transfer technology:
    Patent design “L” shaped heat sink layout.
    This technology helps to guide the air flow along the heat sink to improve the air circulation for maximum performance.
     
  • Hyper Path™:
    Patent design hyper link between IC and the relative components.>
    Patent energy conversion design path provides super efficient connection from the transformer to components. The signal can be transfer directly without any energy loss.
     
  • Single 12 V Power Rail
    Tackling challenges from the most power-intensive peripherals head on, this solitary 12 V power rail provides ample power and strong resistance to any overloading.
     
  • Double-Layer EMI Filter
    Dual protection from electromagnetic interference, thus restraining noise and interference for greater protection for you and your connections.
     
  • Intel Compliant
    ATX12V v 2.3 and EPS version 2.91 compliant.
     
  • Intelligent Fan Speed Control
    Speed control makes the 135 mm fan adept for any user’s circumstances and need.
     
  • Active PFC+ PWM Combo Controller
    Integrating this active controller will increase the efficiency of any computer, making PFC higher than 99%.
     
  • Multiple Protection Design
    Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP), Short Circuit Protection (SCP) and Over Current Protection (OCP).
     
  • Efficient Transformer
    - Adeptly holding power for minimal loss in the 5V standby voltage so the system is promptly up and ready from power on or sleep modes
    - Highly efficient design on par with 80Plus Gold requirements (90% typical).
     
  • And More
    - Multiple updated connectors for all types of interfaces (PCIe, SATA etc.)
    - Simple cable management utilizing flat modular cables for increased airflow.
    - High reliability with an MBTF of at least 100,000 hours of use.
    - NVIDIA SLI-Ready Certified guarantees enough ample power and up-to date connectors for SLI graphics cards.
    - Five Year Warranty.
Model RS-C00-80GA-D3
Type Intel Form Factor ATX 12V V2.3
SSI Form Factor EPS 12V V2.92
Dimension (W x L x H) 150 X 180 X 86 mm
5.9 x 7.09 x 3.4 inch
Input Voltage 90-264Vac (Auto Range)
Input Current 12.5 - 6A
Input Frequency Range 47-63Hz
PFC Active PFC (0.99)
Power Good Signal 100~500ms
Hold Up Time >17ms
Efficiency 90% typical
MTBF >100,000 hours
Protection OVP / UVP / OCP / OPP / OTP / SCP
Output Capacity 1200W
Max. Output Capacity 1440W
Operation Temperature 0~40°C (Nominal Input Voltage)
Regulatory CE / FCC / UL / TUV / C-Tick / GOST / BSMI / CCC / KCC
Fan 135mm Ultra Silent Fan
Certifications SLI / CrossFire / 80 Plus Gold
Connector M/B 20 + 4 pins x 1
CPU 4 + 4 pins x 2
PCI-e 6+2 pins x 4 / PCI-e 6 pins x 4
(One PCI-e 6+2 pins connector
extends to one PCI-e 6 pins connector)
SATA x 9 / Peripheral 4 pins x 4
Floppy 4 pins x 1




JoobiJoobi